4.938 Inch | 125.425 Millimeter x 6.04 Inch | 153.416 Millimeter x 6.125 Inch | 155.575 Millimeter QM INDUSTRIES QMPX26J415SB Pillow Block Bearings
The online 4.938 Inch | 125.425 Millimeter x 6.04 Inch | 153.416 Millimeter x 6.125 Inch | 155.575 Millimeter QM INDUSTRIES QMPX26J415SB Pillow Block Bearings parts store 4.938 Inch | 125.425 Millimeter x 6.04 Inch | 153.416 Millimeter x 6.125 Inch | 155.575 Millimeter gives you immediate access to a selection Zhejiang Huaxin bearing accessories Co., Ltd. of more than 1.4 million new, used, remanufactured.
What is QMPX26J415SB bearing cross reference?
Brand Name: |
QM INDUSTRIES |
Model Number: |
QMPX26J415SB |
Port Orientation - Cover End: |
45.0 LB |
Shaft Dia.: |
Flange Mount |
Manufacturer Part No.: |
Right Hand (CW) |
Max. RPM [Max: |
2520VQ12A5-11DD20 |
Mounting: |
2 1/2 |
Shaft Type: |
Flange |
Port Type: |
N/A |
Shaft Seal Type: |
Standard Pilot |
Product Details
Port Orientation - Cover End |
45.0 LB |
Shaft Dia. |
Flange Mount |
Manufacturer Part No. |
Right Hand (CW) |
Max. RPM [Max |
2520VQ12A5-11DD20 |
Mounting |
2 1/2 |
Shaft Type |
Flange |
Port Type |
N/A |
Shaft Seal Type |
Standard Pilot |
Cover End RPM [Max |
0.875 in |
Displacement Cover End (cu in/revolution) |
13 Tooth Splined |
Minor Diameter [Max |
2520VQ |
Rotation |
1 3/8 in |
GPM @ 1,800 rpm, Shaft End |
Buna-N |
Pressure Port Size, Cover End |
2700 |
Major Diameter [Min |
0.715 in |
Controlled Flow Rate |
SAE B, 2 Bolt |
GPM @ 1,800 rpm, Cover End |
Single Shaft Seal |
Major Diameter [Max |
16/32 |
Pilot Type |
2700 |
Shaft End Flow @ RPM |
2700 |
Minor Diameter |
N/A |
Minor Diameter [Min |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
Seal Material |
0.873 in |
Displacement Shaft End (cu in/revolution) |
0.872 in |
Shaft Key |
N/A |
Integral Valve Configuration |
N/A |
Shaft Length |
N/A |
Model No. |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
Weight |
2520VQ12A5-11DD20 |
Cover End Flow @ RPM |
3000 |
Pump Series |
3000 |
Port Orientation - Shaft End |
7.5 |
Pressure Port Size, Shaft End |
18 |
Port Size |
w/o Integral Valves |
Mounting Flange |
Outlet 135° CW from Inlet |
Cover End Pressure [Max |
Outlet 90° CW from Inlet |
Spline Description |
3/4 in Flange |
Relief Valve Setting |
1 in Flange |
Shaft End RPM [Max |
1.1 |
Shaft End Pressure [Max |
2.45 |
Company Profile
Worktime |
9:00-18:00(BeiJing time) |
Phone |
86-15759862231 |