3.543 Inch | 90 Millimeter x 6.299 Inch | 160 Millimeter x 2.362 Inch | 60 Millimeter TIMKEN 2MM218WI DUH Precision Ball Bearings
With over 10170 full-service stores, our 3.543 Inch | 90 Millimeter x 6.299 Inch | 160 Millimeter x 2.362 Inch | 60 Millimeter TIMKEN 2MM218WI DUH Precision Ball Bearings inventory is extensive and our parts are priced right. within Lubrication Fitting lubrication type: 24 hours. This helps you maximize your productivity by saving time and your Zhejiang Huaxin bearing accessories Co., Ltd. hard-earned 3.543 Inch | 90 Millimeter x 6.299 Inch | 160 Millimeter x 2.362 Inch | 60 Millimeter dollars.
What is 2MM218WI DUH bearing cross reference?
Brand Name: |
TIMKEN |
Model Number: |
2MM218WI DUH |
Spline Description: |
45.0 LB |
GPM @ 1,800 rpm, Cover End: |
Flange Mount |
Max. RPM [Max: |
Right Hand (CW) |
Minor Diameter: |
2520VQ14A5-1CC20 |
Cover End Flow @ RPM: |
2.5 |
Weight: |
Flange |
Cover End Pressure [Max: |
3/16 in |
Integral Valve Configuration: |
Standard Pilot |
Product Details
Spline Description |
45.0 LB |
GPM @ 1,800 rpm, Cover End |
Flange Mount |
Max. RPM [Max |
Right Hand (CW) |
Minor Diameter |
2520VQ14A5-1CC20 |
Cover End Flow @ RPM |
2.5 |
Weight |
Flange |
Cover End Pressure [Max |
3/16 in |
Integral Valve Configuration |
Standard Pilot |
Shaft Key |
0.875 in |
Port Orientation - Shaft End |
Straight w/ Key |
Pilot Type |
2520VQ |
Shaft Type |
1.9375 in |
Displacement Cover End (cu in/revolution) |
Double |
Port Type |
Buna-N |
Shaft Length |
2700 |
Pressure Port Size, Shaft End |
N/A |
Relief Valve Setting |
SAE B, 2 Bolt |
Minor Diameter [Max |
Single Shaft Seal |
Mounting Flange |
N/A |
Shaft Dia. |
2700 |
Controlled Flow Rate |
2700 |
Port Size |
N/A |
Port Orientation - Cover End |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
Seal Material |
N/A |
Rotation |
N/A |
Shaft End Flow @ RPM |
N/A |
Minor Diameter [Min |
N/A |
Cover End RPM [Max |
N/A |
Pump Series |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
Mounting |
2520VQ14A5-1CC20 |
Major Diameter [Max |
3000 |
Major Diameter [Min |
3000 |
Manufacturer Part No. |
7.5 |
Shaft Seal Type |
21 |
Pressure Port Size, Cover End |
w/o Integral Valves |
Shaft End Pressure [Max |
Outlet 45° CW from Inlet |
GPM @ 1,800 rpm, Shaft End |
Outlet Inline w/Inlet |
Model No. |
3/4 in Flange |
Shaft End RPM [Max |
1 in Flange |
Displacement Shaft End (cu in/revolution) |
2.8 |
Company Profile
Worktime |
9:00-18:00(BeiJing time) |
Phone |
86-15759862231 |