3.543 Inch | 90 Millimeter x 6.299 Inch | 160 Millimeter x 2.362 Inch | 60 Millimeter TIMKEN 2MM218WI DUH Precision Ball Bearings
With over 10170 full-service stores, our 3.543 Inch | 90 Millimeter x 6.299 Inch | 160 Millimeter x 2.362 Inch | 60 Millimeter TIMKEN 2MM218WI DUH Precision Ball Bearings inventory is extensive and our parts are priced right. within Lubrication Fitting lubrication type: 24 hours. This helps you maximize your productivity by saving time and your Zhejiang Huaxin bearing accessories Co., Ltd. hard-earned 3.543 Inch | 90 Millimeter x 6.299 Inch | 160 Millimeter x 2.362 Inch | 60 Millimeter dollars.
What is 2MM218WI DUH bearing cross reference?
Brand Name: | TIMKEN |
Model Number: | 2MM218WI DUH |
Spline Description: | 45.0 LB |
GPM @ 1,800 rpm, Cover End: | Flange Mount |
Max. RPM [Max: | Right Hand (CW) |
Minor Diameter: | 2520VQ14A5-1CC20 |
Cover End Flow @ RPM: | 2.5 |
Weight: | Flange |
Cover End Pressure [Max: | 3/16 in |
Integral Valve Configuration: | Standard Pilot |
Product Details
Spline Description | 45.0 LB |
GPM @ 1,800 rpm, Cover End | Flange Mount |
Max. RPM [Max | Right Hand (CW) |
Minor Diameter | 2520VQ14A5-1CC20 |
Cover End Flow @ RPM | 2.5 |
Weight | Flange |
Cover End Pressure [Max | 3/16 in |
Integral Valve Configuration | Standard Pilot |
Shaft Key | 0.875 in |
Port Orientation - Shaft End | Straight w/ Key |
Pilot Type | 2520VQ |
Shaft Type | 1.9375 in |
Displacement Cover End (cu in/revolution) | Double |
Port Type | Buna-N |
Shaft Length | 2700 |
Pressure Port Size, Shaft End | N/A |
Relief Valve Setting | SAE B, 2 Bolt |
Minor Diameter [Max | Single Shaft Seal |
Mounting Flange | N/A |
Shaft Dia. | 2700 |
Controlled Flow Rate | 2700 |
Port Size | N/A |
Port Orientation - Cover End | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
Seal Material | N/A |
Rotation | N/A |
Shaft End Flow @ RPM | N/A |
Minor Diameter [Min | N/A |
Cover End RPM [Max | N/A |
Pump Series | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
Mounting | 2520VQ14A5-1CC20 |
Major Diameter [Max | 3000 |
Major Diameter [Min | 3000 |
Manufacturer Part No. | 7.5 |
Shaft Seal Type | 21 |
Pressure Port Size, Cover End | w/o Integral Valves |
Shaft End Pressure [Max | Outlet 45° CW from Inlet |
GPM @ 1,800 rpm, Shaft End | Outlet Inline w/Inlet |
Model No. | 3/4 in Flange |
Shaft End RPM [Max | 1 in Flange |
Displacement Shaft End (cu in/revolution) | 2.8 |
Company Profile
Worktime |
9:00-18:00(BeiJing time) |
Phone |
86-15759862231 |